6×10W 4 in 1 LED PAR LIGHT

6×10W(RGBW 4 IN 1) LED STAGE EQUIPMENT

PL209M1（RGBWA 5 IN 1）/M2（RGBWAP 6 IN 1）M3（RGBW 4 IN 1）

Power supply：AC100-240V，50Hz/60Hz

Power consumption：M1：45W     M2：60W     M3：35W

Light source：M1：6×10W(RGBWA 5 IN 1)LED lamps

M2：6×10W(RGBWAP 6 IN 1)LED lamps

M3： 6×10W(RGBW 4 IN 1)LED lamps

Life Time：60000 hours

Color temperature：6000K

Beam angle：25°(45°Optional)

Control panel：4 Digital LED display figures

Control mode：sound activation，auto，master/slave，DMX-512

DMX channels：M1：4 / 5 / 9 CHS

M2：4 / 6 / 10 CHS

M3：4 / 4 / 8 CHS

Dimmer：0-100% with regulated constant color control

Strobe：electronicstrobe,1-25times/sec

Working environment：up to 40°C

Protection rate：IP20

Cover：casting aluminum

Dimension size：225×225×130mm

Packing size：260×260×320mm

N.W：4.2kg

G.W：5 kg

Cleaning & Maintenance of LED STAGE EQUIPMENT

Clean the product frequently, it can keep the output brightness and extend the product life

Warning：It must be power off before cleaning or maintenance of the light.

1. Product cleaning
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation will weaken the brightness of the light.
B. Use soft cloth with water to clean, do not with organic solvents, such as ethyl alcohol
C. Clean the cool fan each month

2. Product maintenance
Product maintenance must consider the below terms.
A. All screws mounted on the lamp must reliably tighten, check and replace the corroded screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damaged and if the insulation layer is worn down.
D. To ensure good connection of the various parts of the circuit, and to avoid unnecessary accidents coursed by bad electrical connections,
the detailed inspection of the light must be made by the authorized electrical engineer every three months

More details about LED STAGE EQUIPMENT welcome to CONTACT US