7×10W(RGBWAP 6 IN 1) LED DJ LIGHT
PL210M1（RGBWA 5 IN 1）/M2（RGBWAP 6 IN 1）
Power consumption：M1：70W M2：70W
Light source：M1：7×10W(RGBWA 5 IN 1)LED lamps
M2：7×10W(RGBWAP 6 IN 1)LED lamps
Life Time：60000 hours
Control panel：4 Digital LED display figures
Control mode：sound activation, auto, master/slave, DMX-512
DMX channels：4 / 6 CHS
Dimmer：0-100% with regulated constant color control
Working environment：up to 40°C
Cleaning & Maintenance of LED DJ LIGHT
Clean the product frequently, it can keep the output brightness and extend the product life
Warning：It must be power off before cleaning or maintenance of the light.
1. Product cleaning
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation will weaken the brightness of the light.
B. Use soft cloth with water to clean, do not with organic solvents, such as ethyl alcohol
C. Clean the cool fan each month
2. Product maintenance
Product maintenance must consider the below terms.
A. All screws mounted on the lamp must reliably tighten, check and replace the corroded screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damaged and if the insulation layer is worn down.
D. To ensure good connection of the various parts of the circuit, and to avoid unnecessary accidents coursed by bad electrical connections,
the detailed inspection of the light must be made by the authorized electrical engineer every three months
More details and quotation welcome to CONTACT US