Stage Lighting System, the professional R & D, Manufacturing and Sales team | XUANFENG LIGHTING

For the complex traditional stage lighting system, this aspect of the lighting includes color, color, color temperature, brightness,

projection range, the scene of the dimmer, sequence of lighting, and the lighting of the light Program editing and other aspects of the content,

not the general practical engineering can be a simple debugging, like a sound system, also need to do a lot of serious debugging to complete,

or as mentioned earlier, for the traditional complex lighting system Design and construction and debugging,

preferably in the professional design institutes and professional performance units with the help of.

The general sound engineering lighting system debugging, because the performance requirements of the professional venues are not strict,

so the debugging involve in the technical indicators are few, relatively speaking, the lighting system debugging is not complicating,

but there are also technical requirements higher than the traditional stage lighting technology is not much, relatively speaking,

the lighting system debugging is not complicating, but there are technical requirements higher than the traditional stage lighting technology.

That is: in the practical sound engineering involves a lot of computer lights, so engineering Personnel should study hard in this respect.

Here we begin to explain some of the stage lighting systems how to debug the problem.

First of all, should carefully check the status of each device alone, because the computer’s internal control system

and mechanical parts more sophisticated, light power consumption, protection measures are relatively perfect,

so if the transport or installation due to internal control Components or bulb damage.

The computer lights generally do not work properly and want to complex lighting system to confirm

the fault of the cause of the fault is too much trouble, so try to connect or install the system before the separate check each Equipment.

The situation can do both check the lights and check the purpose of the console.

Second, to the correct lighting settings. It can be said that all the computer lights should be in the correct settings to work properly,

so in order to the unit and the system in a normal and orderly state, the correct setting is very important,

set the contents to include lighting control, power the mode of supply, the range of motion, the address of the lamp in the system.

The processing of the control line terminal, where the position of the fixture in the system is often set in the project,

and its setting is based on the choice of the address code.

Stage Lighting System: That is, the DIP switch on the lamp must be strictly

in accordance with the product specification provides the form, cannot act hastily.

Moreover, the lighting control equipment is set. The biggest feature of the computer lights is that they need to have the appropriate control device

have the appropriate control device they need to have the appropriate control device set unreasonable or failure,

the computer will not work properly, or even work, especially complex the control system of the lighting system

plays an important role in the normal operation of the lighting.

Therefore, the equipment must set, the contents of the control include the control mode, the output mode of the control signal,

the type and quantity of the lamp, the control software Content and so on.

Finally, here need to explain: After the completion of the above steps, you need to check the action of the controller and the action

of the fixture is consistent with the normal self-test lamps, etc.

Also, we must pay attention to the lighting system and the sound system with each other interference.

If any, then record the time to produce dry and specific equipment models, in order to facilitate future solutions.

More information about stage lighting system welcome to contact us, Guangzhou Xuan Feng Lighting Co., Ltd.