24x10W RGBW(4 in 1)LED Waterproof Wash Light
OD041A-24x10W RGBW(4 in 1)LED Outdoor Wash Light
Power supply: AC100-120V,60Hz; AC220-240V,50Hz
Power consumption:300W
Light source: 24 x 10W RGBW(4in1)LED lamps
Life Time:60000 hours
Beam angle:25°(45°/15° optional)
Control panel:4 Digital LED display figures
Control mode:auto, master/slave, DMX-512
DMX channels:7CHS
Feature:
Mixing color:RGBW linear mixing color
Dimmer:0-100% non-linear dimming
Strobe:Independent electronic strobe,1-20Hz
Rotate angle:180°
Working environment:up to 40°C
Protection rate:IP65
Cover:casting aluminum
Dimension:633×226×358mm
Packing Size:740×280×380mm(Wooden case)
700×280×440mm(Flight Case)
N.W:18.5kg
G.W:23kg(Wooden case)
26.5kg(Flight Case)
LED Waterproof Wash Light: Cleaning & Maintenance
Clean the product frequently, it can keep the output brightness and extend the product life
Warning:It must be power off before cleaning or maintenance of the light.
1. Product cleaning
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation will weaken the brightness of the light.
B. Use a soft cloth with water to clean, do not with organic solvents, such as ethyl alcohol
C. Clean the cool fan each month
2. Product maintenance
Product maintenance must consider the below terms.
A. All screws mounted on the lamp must reliably tighten, check and replace the corroded screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damaged and if the insulation layer is worn down.
D. To ensure a good connection between the various parts of the circuit, and to avoid unnecessary accidents coursed by bad electrical connections,
the detailed inspection of the light must be made by the authorized electrical engineer every three months.
More details about LED Waterproof Wash Light welcome to contact us
Reviews
There are no reviews yet.