200W COB LED PAR

High-Efficiency 200W Warm white + Cool white COB LED PAR | Professional Stage Lighting Manufacturer, Supplier, Exporter

PL100-200W Warm white + Cool white COB LED PAR

Power supply：AC100-240V,50Hz-60Hz

Power consumption：200W / 260W / 260W

Light source：180W(RGB 3 in 1)

200W(Warm white and cool white)

200W(Warm white or cool white)

Color temperature：2000-6500K

Life time：30000 hours

Beam angle：60°

CRI：> 90

Control panel：4 Digital LED display figures

Controls mode：Sound(single color without sound control), Master/Slave, Auto, DMX512

DMX channels：7CHS(RGB) / 5CHS(double color) / 3CHS(single color)

Dimmer：0~100% linearly adjustable

Strobe：Electronic strobe,1-20times/sec

Working environment：up to 40°C

Protection rate：IP20

Cover：Casting Aluminum

Dimension size：300×230×320mm

Packing size：250x250x360mm

N.W：3.7kg

G.W：4.5kg

COB LED PAR: Cleaning & Maintenance

Clean the product frequently, it can keep the output brightness and extend the product life

Warning：It must be power off before cleaning or maintenance of the light.

1. Product cleaning
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation will weaken the brightness of the light.
B. Use a soft cloth with water to clean, do not with organic solvents, such as ethyl alcohol
C. Clean the cool fan each month

2. Product maintenance
Product maintenance must consider the below terms.
A. All screws mounted on the lamp must reliably tighten, check and replace the corroded screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damaged and if the insulation layer is worn down.
D. To ensure a good connection between the various parts of the circuit, and to avoid unnecessary accidents coursed by bad electrical connections,
the detailed inspection of the light must be made by the authorized electrical engineer every three months.

More details and quotation welcome to contact us