Outdoor Architectural Lighting, the magical light of night | XF Lighting

Outdoor Architectural Lighting provides with the objective of enhancing buildings look such that it looks better than during the day.

What’s Outdoor Architectural Lighting? What role does it play in our life?

Outdoor Architectural Lighting, also known as City Lighting and Projection Lights etc., mainly use for building decorative lighting purposes,
as well as commercial space lighting, decorative ingredients heavier.
Its appearance is round and quadrate because generally have to consider the reasons for heat, so its shape and the traditional cast light on
there are some differences.

What do you need to pay attention to when using Outdoor Architectural Lighting?

1, high purity aluminum reflector, the most accurate beam, the best reflection.
2, symmetrical narrow-angle, wide angle and asymmetric distribution system.
3, behind the open replacement lamp, easy maintenance.
4, lamps are equipped with a dial to facilitate the adjustment of the angle of exposure.

At present, the main application sites are probably these: single building, historical buildings outside the wall lighting, building light through the lighting,
indoor local lighting.

XF Outdoor Waterproof Architectural Series

OD040B 2 x 96 x 3W LED Double Wash Light

OD041B 96 x 3W LED Single Wash Light

OD040A 2x 24x10W RGBW(4in1) LED Double Wash Light

OD041A 24x10W RGBW(4 in 1)LED Single Wash Light

Outdoor Architectural Lighting: Pay more attention to its Cleaning & Maintenance

Clean the product frequently, it can keep the output brightness and extend the product life

Warning：It must be power off before cleaning or maintenance of the light.

1. Product cleaning
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation will weaken the brightness of the light.
B. Use soft cloth with water to clean, do not with organic solvents, such as ethyl alcohol
C. Clean the cool fan each month

2. Product maintenance
A. All screws mounted on the lamp must reliably tighten, check and replace the corroded screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damaged and if the insulation layer is worn down.
D. To ensure good connection of the various parts of the circuit, and to avoid unnecessary accidents coursed by bad electrical connections,
the detailed inspection of the light must be made by the authorized electrical engineer every three months.

More details welcome to contact us XF Lighting