Under Lighting System: Moving Head Beam and Controller use together on stage, causing the perfect combination performance.

Lighting System

Moving Head Beam and Controller two IMPORTANT parts of Lighting System.

What do you know about this two light? Just for a light with a different effect, but when these two used together at the same occasion and same timing, that must create a wonderful performance, you have to know that.

For the complex traditional stage lighting system, this aspect of the lighting includes color, color, color temperature, brightness,

projection range, scene of the dimmer, sequence of lighting, and the lighting of the light Program editing and other aspects of the content,

not the general practical engineering can be a simple debugging, like a sound system, also need to be a lot of serious debugging to complete.

The general sound engineering lighting system debugging, because the performance requirements of the professional venues are not strict,

so the debugging involved in the technical indicators are few, relatively speaking, the lighting system debugging is not complicated,

but there are also technical requirements higher than The traditional stage lighting technology is not much, relatively speaking,

the lighting system debugging is not complicated, but there are technical requirements higher than the traditional stage lighting technology,

that is: in the practical sound engineering involved in a lot of computer lights, so engineering Personnel should study hard in this respect.

Lighting System: Do you know how to debug the problem for lighting equipment?

First of all, should be carefully checked the status of each device alone.

Second, to the correct lighting settings. It can be said that all the computer lights should work properly in the correct settings.

so in order to the unit and the system in a normal and orderly state, the correct setting is very important.

Moreover, the lighting control equipment is set.

The biggest feature of the computer lights is that they need to have the appropriate control device to control the operation.

Finally, need to explain: After the completion of the above steps, you need to check the action of the controller and

the action of the fixture is consistent with the normal self-test lamps, etc. Also, we must pay attention to the lighting system

and the sound system with each other interference.

If any, then record the time to produce dry and specific equipment models, in order to facilitate future solutions.

More information about  Moving Head Beam and Controller or other stage lighting welcome to contact us.