HOW TO CHOOSE THE GOOD LED PAR CAN_?

HOW TO CHOOSE THE GOOD LED PAR CAN_?

To Identify suitable LED PAR CAN as below tips

Purchasing LED PAR CAN_ is a science, in order to be able to buy good quality products in a large number of lighting equipment,
it is necessary to start from some basic aspects of the matter as an optional reference.
Now let XuanFeng Lighting introduce to you how to choose the suitable led par light for yourself accordingly to your requirements.

1.The color of LEDs
Regular good quality LED PAR CAN_, their color should be bright and full of color, no noise, no spot, high brightness and so on.

2.LED Lamp and chip
Generally the chip of LED, the 1Watt is 40 x 40; but the 3W is 45×45. Also now the brand of LED lamp is CREE, OSRAM, Tianxin(which is the most used), jinxing etc.

Currently, on the market, many manufacturers use less wattage lamp beads to act, for example, 3-watt lamp beads, usually only 1 watt, or 0.7 watts.

3.Power supply
The power supply, you can be identified from the transformer and power tube volume.
Always the better quality is relatively large, plump overall and texture, components arranged,

producing a good process, the overall look is clean and beautiful.

4.Heat Sink
Do not think that the thinner the better radiator, too thin, then easily cause a poor cooling effect.

5.Main and Display Board
The main board of LED PAR CAN_ is selection constant drive plate than cross flow plate well,

LED lamp life will be longer because the constant drive plate is better to lamp.

6.Wiring
Use red glue to daub each connection in order to avoid the parts take off the line during shipment.

7.Price
Generally, more formal LED PAR CAN_its market price will not be too far behind, if the purchase price is too low and that most likely fake.
So from the price can also be a simple judgment.

Through the above points, you may know more clearly how to choose a more cost-effective led par can.

More details about LED PAR CAN_welcome to contact us