1. Power supply: three-phase AC380V ± 10%, frequency 50Hz ± 5%.
2. Equipped with a 125A main control switch
3. Rated power: 24 channels x 4KW; Suitable for any load.
4. High breaking air switch with dual protection against overload and short circuit.
5. 24 channel 40A rubber wood plug output;
6. Built in 24 relays with remote control, the relays are made of high-quality copper nickel plated material for instant triggering.
7. Equipped with three control modes: international DMX512 signal protocol, Art net lighting network protocol, and intelligent control customization protocol.
8. It can be controlled in real-time through a separate electronic control interface through a matching intelligent control system; The host can also manually turn on and off each circuit or perform real-time operation commands on the lighting control panel through physical buttons on the electrical cabinet host.
9. It is possible to independently set the initial on/off state mode for each circuit when powered on;
Mode selection: Three modes: A boot execution, B delayed execution, and C immediate execution;
Note: In the startup execution mode, when the power cabinet is powered on, each power line will power on the equipment every 0.6 seconds. After power on, there will be a buffer in the current to better protect the equipment. This mode can replace the time drive function.
10. Three independent current and voltage monitoring meters; Equipped with an LCD screen that can operate the host interface.
11. Main configuration: Circuit breaker, Delixi. Cable: the Pearl River cable.
