04 May
COB Blinder Light 4, LED Stage Light

Differences between traditional Blind Light 4 and COB LED Blinder Light 4

Differences between traditional Blind Light 4 and COB LED Blinder Light 4

How many you know about traditional Blind Light 4 and COB LED Blinder Light 4?

These two Blind Light 4 has the similar functions but different material such as housing and light source etc.

Below will show you more details…

                  Blinder Light 4

Blind Light 4                                                                              COB LED Blinder Light

Power supply: AC 110/220V, 50/60Hz                               Power supply：AC100-240V,50Hz-60Hz
Power consumption: 2600W                                                  Power consumption：350W
Lamp type: DWE 120V/650W x 4                                         Light source：4x100W(WARM WHITE)        CRI：>80
Color temperature: 3200K                                                      Controls mode：Sound, Master/Slave, Auto, DMX512
Dimension size: 440 x 400 x 150 mm                                  Control panel：LCD display + 4 soft keys
Packing size: 460 x 230 x 480 mm                                        DMX channels：1 / 2 / 4 / 8Chs
N.W: 4.7 kg                                                                                     Dimension size：350×350×115mm              N.W：5.0kg
G.W: 5.7 kg                                                                                     Packing size：420x170x465mm                     G.W：6.8kg

Blinder Light 4

Cleaning & Maintenance

Clean the product frequently, it can keep the output brightness and extend the product life

Warning：It must be power off before cleaning or maintenance of the light.

1. Product cleaning
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation will weaken the brightness of the light.
B. Use soft cloth with water to clean, do not with organic solvents, such as ethyl alcohol
C. Clean the cool fan each month

2. Product maintenance
A. All screws mounted on the lamp must reliably tighten, check and replace the corroded screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damaged and if the insulation layer is worn down.
D. To ensure good connection of the various parts of the circuit, and to avoid unnecessary accidents coursed by bad electrical connections,
the detailed inspection of the light must be made by the authorized electrical engineer every three months.

More information or  inquiry welcome to chat with us online, here is XuanFeng websitehttp://xuanfengled.com