31pcs 10w White Led Motor show Light also named the car display light.
Power supply: AC100-240V, 50Hz-60Hz
Power consumption:300W
Light source:31×10w (CREE WHITE)LED lamps
Life time:60000 hours
Color temperature:6500K(optional 3200K/4500K)
Beam angle:20°(optional 15°/45°)
Control panel:4 Digital LED display figures
Control mode:Master/Slave, DMX-512
DMX channels:2CHS
Dimmer:0-100% with regulated constant color control
Working environment:up to 40°C
Protection rate:IP20
Cover:Cast Aluminium
Dimension size:235×235×520mm
Packing size:600×300×250mm
N.W: 6.4kg
G.W: 8.8kg
31pcs 10w White Led Motor show Light, showing the best effect between model and the car.
Stage Motor-Show Light: Cleaning & Maintenance
Clean the product frequently, it can keep the output brightness and extend the product life
Warning:It must be power off before cleaning or maintenance of the light.
1. Product cleaning
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation will weaken the brightness of the light.
B. Use a soft cloth with water to clean, do not with organic solvents, such as ethyl alcohol
C. Clean the cool fan each month
2. Product maintenance
A. All screws mounted on the lamp must reliably tighten, check and replace the corroded screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damaged and if the insulation layer is worn down.
D. To ensure a good connection between the various parts of the circuit, and to avoid unnecessary accidents coursed by bad electrical connections,
the detailed inspection of the light must be made by the authorized electrical engineer every three months.
More details about 31pcs 10w White Led Motor show Light welcome to contact us.